redirect
Loading...
TEW-929DRU
1
Dashboard
Overview
System
Time / Date
Schedule
Dynamic DNS
Samba (USB)
WoL
Routes / ARP
System Log
Device Mode
Bark®
Network
LAN
WAN
IPv6
VLAN
Routing
Wireless
Wireless 2.4GHz
Wireless 5GHz
Guest Network
WPS
Captive Portal
Security
Firewall
VPN
ALG
RADIUS
UPnP / NAT-PMP
Multi-WAN / QoS
Multi-WAN
QoS
Management
Administration
Certificate Management
Access Management
Firmware / Configuration
Reboot
Tools
Diagnostics
Ping Watchdog
Save
Logout
New firmware is available!
Go to upgrade new firmware...
Guest Network
This section allows you to configure the wireless guest network settings. The wireless guest network functions as a separate wireless network with a different wireless network name (SSID), WiFi Key. and IP address subnet from your primary 2.4GHz and 5GHz wireless LAN networks. In addition, the wireless guest network is restricted from accessing your primary LAN IP network and only allows Internet access.
2.4GHz Guest Network
2.4GHz Guest Network
Enable/Disable Guest Network
Disable
Enable
Network Name(SSID)
Mode
Access Point
Security Mode
No Encryption
OWE
WPA2 Personal
WPA2 Personal Mixed Mode
WPA3 Personal
WPA2/WPA3 Personal Mixed Mode
Protected Management Frames
5GHz Guest Network
5GHz Guest Network
Enable/Disable Guest Network
Disable
Enable
Network Name(SSID)
Mode
Access Point
Security Mode
No Encryption
OWE
WPA2 Personal
WPA2 Personal Mixed Mode
WPA3 Personal
WPA2/WPA3 Personal Mixed Mode
Protected Management Frames
Guest DHCP
Guest DHCP
IPv4 address
Start
Lowest leased address as offset from the network address.
End
Highest leased address as offset from the network address.
Leasetime
Expiry time of leased addresses, range 2m ~ 999999h (m = minutes, h = hours).
Separate Clients
Prevents client-to-client communication